閉風器不出料的原因及解決方案

The reasons and solutions for the failure of the air shutter to discharge materials

　　一、閉風器介紹

1、 Introduction to Air Shutter

　　閉風器是一種常用于工業生產中的粉狀、顆粒狀物料輸送設備，通常用于石化、冶金、電力、制藥等領域。其輸送效率高、占地面積小、操作簡便，因此廣受使用。

A closed air device is a commonly used equipment for conveying powdered and granular materials in industrial production, typically used in fields such as petrochemicals, metallurgy, power, pharmaceuticals, etc. Its high conveying efficiency, small footprint, and easy operation make it widely used.

　　二、閉風器不出料的可能原因

2、 Possible reasons for the non discharge of the air shutter

　　1.流量不足：閉風器要求物料通過的流量必須滿足一定標準，如果流量不足，就會導致不出料的情況。

1. Insufficient flow rate: The air shutter requires that the flow rate through which the material passes must meet certain standards. If the flow rate is insufficient, it will lead to the situation of no discharge.

　　2.料倉堵塞：料倉內的物料堵塞也會影響閉風器的正常運轉，導致不出料。

2. Silo blockage: Material blockage inside the silo can also affect the normal operation of the air shutter, resulting in no discharge.

　　3.本體設備故障：閉風器的本體設備可能存在損壞或故障，如閥門關閉不嚴實、傳動裝置失靈、電氣控制系統故障等，都會導致不出料。

3. Main equipment failure: The main equipment of the air shutter may be damaged or malfunctioning, such as poorly closed valves, malfunctioning transmission devices, electrical control system failures, etc., which can lead to failure to discharge materials.

　　三、解決方法

3、 Solution

　　1.調整流量：如果是由于流量不足導致的不出料情況，可以通過調整流量來解決。具體操作為增加物料流量或調整閥門開度，以滿足閉風器的要求。

1. Adjust flow rate: If the non discharge situation is caused by insufficient flow rate, it can be solved by adjusting the flow rate. The specific operation is to increase the material flow rate or adjust the valve opening to meet the requirements of the air shutter.

　　2.清理堵塞：如果是由于料倉堵塞導致的不出料情況，可以先停止閉風器的工作，清理料倉內的物料，排除堵塞。

2. Cleaning blockage: If the failure to discharge is caused by blockage in the silo, the operation of the air shutter can be stopped first to clean the materials in the silo and eliminate the blockage.

　　3.檢修設備：如果是由于本體設備故障導致的不出料情況，需要對設備進行檢修。具體操作為摸清故障原因，更換故障零部件或修理損壞部位，以保障設備的正常運轉。

3. Equipment maintenance: If the failure of the main equipment results in the inability to discharge, the equipment needs to be repaired. The specific operation is to identify the cause of the malfunction, replace faulty components or repair damaged parts to ensure the normal operation of the equipment.

　　四、注意事項

4、 Precautions

　　1.使用閉風器時，應注意控制物料的流量，不能超過其要求標準。

When using a shut-off fan, attention should be paid to controlling the material flow rate and not exceeding its required standards.

　　2.經常對閉風器進行維護和保養，定期進行清洗和潤滑等工作，以延長設備壽命。

2. Regularly maintain and upkeep the air shutter, clean and lubricate it regularly to extend the service life of the equipment.

　　3.在檢修設備時，應嚴格按照操作規程進行操作，確保安全。

When repairing equipment, it is necessary to strictly follow the operating procedures to ensure safety.

　　【結尾】以上是關于閉風器不出料可能原因及解決方法的相關介紹，希望能夠?qū)ιa(chǎn)操作中遇到的問題提供幫助。在任何情況下，保障安全和設備正常運轉都是最重要的。

[Conclusion] The above is an introduction to the possible reasons and solutions for the failure of the air shutter to discharge, hoping to provide assistance for the problems encountered in production operations. In any case, ensuring safety and normal equipment operation is the most important.

本文由閉風器提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.lsynjl.com我們將會全心全意為您提供滿意的服務。

This article is provided with technical support by the air shutter. For more detailed and exciting content, please click on our website http://www.lsynjl.com We will wholeheartedly provide you with satisfactory service.